Preface (Standard Libraries)

This catalog lists the more than 20,000 symbols contained in all libraries included in the scope of delivery of CAD6industrie and CAD6studio. Some of the symbols are shown as illustrations.

The libraries listed are not included in CAD6starter.

Note that the sample illustrations shown here will not display or print with the accuracy or definition of the original symbols when used in the application. The samples are intended purely to give you an idea of the libraries’ contents. Each symbol is an accurate, high definition scale drawing in its own right and has been produced by professionals, to industrial standards where appropriate. Use of the appropriate symbol library for your particular field will save you a considerable amount of time and will greatly enhance the quality of your work. Professional quality drawings will become even easier!

While it is believed that all information given in this catalog is correct, we do not make any claims regarding the accuracy of the information given, and accept no responsibility for any consequence of its use or of the products referred to.

Libraries with the addition "3D" do not contain full 3D data, only an isometric view!

100: Digital Information Processing

101: Electrical Installation

102: Electronics

103: Heating Venting

104: Hydraulics Pneumatics

105: Valves

115: Pins DIN 1, 7 + Counterbores DIN 74

116: Thread Run-Outs and Undercuts DIN 76

120: Knobs/Handles DIN 39, 98, 99, 6335, 6336

121: Safety Signs DIN 7010, 4844

129: Traffic Signs VzKAT 1992, Part 3-8

130: Tapping Screws DIN 7971C, 7972C, 7973C, 7976CF

131: Tapping Screws Torx, DIN 7949CZ, 7982, 7983CH

135: Wood-Screws DIN 95, 96, 97, 571

136: Wood-Screws Torx, DIN 7995, 7996, 7997

140: Screws DIN 316, 464, 653

141: Screws DIN 186, 188, 261, 404

142: Screws DIN 427, 478, 479, 480

143: Washers DIN 125, 471, 6797, 6798

144: Screws DIN 931, 933, 963, 7991

145: Screws DIN 960, 961

146: Screws Torx, DIN 84, 444, 580, 912

147: Nuts DIN 315, 439, 466/7, 582, 917, 934, 986, 1587

148: Nuts DIN 1661/3/4, 7040/2, 7719, 24032/3/5

149: Nuts DIN 1666/7, 6923, 10511/2/3, 28673/4/5

200: Electrical Engineering

201: Process Engineering

202: Laboratory Equipment

203: Interior Design

204: Landscape Design

205: Electrical Engineering Circuits

206: Network Design (LAN)

300: Architecture Bathroom Planning

301: Architecture Vehicles

302: Architecture Objects

402: Radial Ball Bearings DIN 625, 628, 630

403: Bearings DIN 617, 711, 715, 720, 5412

410: 3D Washers DIN 125, 128, 471, 6797, 6798, 7349, 9021

411: 3D Screws DIN 931, 963, 7991

412: 3D Screws DIN 84, 444, 912

413: 3D Pins DIN 1, 7 + Counterbores DIN 74

414: 3D Nuts DIN 315, 439, 466/7, 582, 917, 934, 986, 1587

415: 3D Wood-Screws DIN 95, 96, 97, 571

416: 3D Wood-Screws DIN 7995, 7996, 7997

418: 3D Knobs/Handles DIN 39, 98, 99, 6335, 6336

420: 3D Screws DIN 316, 464, 653

421: 3D Screws DIN 186, 188, 261, 404

422: 3D Screws DIN 427, 478, 479, 480

423: 3D Nuts DIN 1661/3/4, 7040/2, 7719, 24032/3/5

424: 3D Nuts DIN 1666/7, 6923, 10511/2/3, 28673/4/5

In libraries with a consistent structure, we only list the subfolders with a summary of their contents (e.g. "M3..M64" representing all symbols from "M3" to "M64").