Parametric Compound > Set Dynamic Origin (Library Menu)

www.CAD6.com

This command can be used to assign a dynamic origin to a freedom of type "Scaling" or "Rotation".

 

1.Choose parametric compound

The parametric compound to be edited must be chosen. Click on an object to choose it.

 

After choosing the compound, the "Select Freedom" dialog appears, in which a freedom of the compound is chosen.

 

2.Choose point

Choose the point that shall be the freedom's origin. Click on a point to choose it.

 

If the required point does not yet exist in the compound, it can be added to the compound beforehand using Add Marking.

 

Please refer to Parametric Compounds for general information.

 

CAD6studio Release 2024.0 - Copyright 2024 Malz++Kassner® GmbH