Change View > Planar Front View of Chosen Plane (3D Menu)

This command can be used change the view of currently active 3D so that a chosen plane is displayed in a planar front view.

Any component face or construction plane can be identified as the rotation plane by clicking onto the component face or onto the construction plane's elliptical representation's outline.

After choosing the plane, the display of the currently active 3D space will be adjusted accordingly.

Changes to the view (i.e. the position and representation of the 3D space relative to the 2D world) cannot be undone using normal Undo, but only using 3D > View Preset > Undo. Alternatively, you can save one view in each room using 3D > View Preset > Save Current View and restore it later using 3D > View Preset > Retrieve Saved View.