Block > Resolve All Block Instance Levels (Library Menu)

www.CAD6.com

This command can resolve instances of blocks completely. This means that for all blocks directly or indirectly referenced, the objects from which the blocks are made up are inserted into the drawing instead of the instance.

 

All the settings in the instance (position, rotation angle, scaling, transmission of properties) are kept, so that the newly created objects may be different from the original objects which made up the block.

 

This command cannot be used to resolve groups that were created using at least Release 2017. This must be done using the Group > Ungroup All Levels command.

 

1.Choose instances

Those instances to be resolved completely are chosen. Click on objects to choose them.

 

After choosing, the instances are resolved. All layers are resolved at once. If the blocks which the selected instances refer to contain other instances, those are resolved, too.

 

 

If there are no instances among the selected objects, then a warning appears. If all the instances in the object are to be resolved, this can be done by pressing the F10 Key to select all objects, choosing the command and repeating the process until the warning appears.

 

Some objects cannot be distorted. These are, above all, circles and circle parts, but also curves and surfaces which contain circle arcs. If an instance which is to be resolved contains such an object in distorted form, then the circles and circle parts are converted to ellipses and ellipse parts during resolution. Circle arcs within curves and surfaces can not be transformed. This leads, unavoidably, to problems in the display.

 

CAD6studio Release 2024.0 - Copyright 2024 Malz++Kassner® GmbH