Print > Section, Rectangle (File Menu)

This command is used to print a rectangular section of a drawing. Any output device for which a driver is installed can be used.

The first corner point of the section can be entered by clicking the mouse at any point within the drawing.

The second corner point of the section can be entered by clicking the mouse at any point within the drawing.

After entering the section, the "Print Drawing" dialog is called, in which the print settings can be specified.

If only certain objects of the section are to be printed, they must be selected before choosing this command, using for example the command Extra > Permanent Selection > Set. The "Selection Only" check box can then be enabled.

The output of partially opaque lines and surfaces can only be guaranteed when using DirectPDF or CAD6PDF. Normal Windows printer drivers and PDF creators only deliver more or less suitable approximations. If you plan on using such objects, please test in time if the result delivered by your desired driver suits your needs. If you use an HPGL-Plotter, please use the HP-GL/2 export filter for plotter output!