Print > Drawing (File Menu)

This command is used to print a drawing or part of a drawing. Any output device for which a driver is installed can be used.

Choosing the command calls the "Print Drawing" dialog, in which the print settings can be specified.

If only certain objects are to be printed, they must be selected before choosing this command, using for example the command Extra > Permanent Selection > Set. The "Selection Only" check box can then be enabled.

The output of partially opaque lines and surfaces can only be guaranteed when using CAD6PDF. Normal Windows printer drivers and PDF creators only deliver more or less suitable approximations. If you plan on using such objects, please test in time if the result delivered by your desired driver suits your needs. If you use an HPGL-Plotter, please use the HP-GL/2 export filter for plotter output!